Power save for SATA drives

Post Reply
mister_v
Posts: 139
Joined: Sat Jun 20, 2009 5:42 pm

Power save for SATA drives

Post by mister_v »

Hi,

I want to save power on my media server by spinning down the hard drives.

Does anyone known any good tools?


Thanks,
Chris
Site Admin
Posts: 129
Joined: Mon Jul 21, 2008 9:45 am
Location: Leuven, Belgium
Contact:

Re: Power save for SATA drives

Post by Chris »

You can do this with:

Code: Select all

hdparm -S 240 /dev/sdc
This will tell you hard drive to power down after 20min of inactivity.

I have read in many forums that it only works for IDE drives,
and doesn't work for SATA drives.
Anyway on my machines it works,
And I have drives from Samsung, Western digital and Hitachi.

You can see the status of you drive with:

Code: Select all

hdparm -C /dev/sdc
/dev/sdc:
 drive state is:  standby
Standby means powered down
active/idle means not being read/write but still spinning.

You can tell you drive to immediately power down with:

Code: Select all

hdparm -Y /dev/sdc
One word of advice:
don't use the commands for the drive with the root partition,
or /tmp , /var/tmp , /var/log, ... any of the dirs that are used a lot.
It won't save you power and probably kill your drive in a year or 2.

Read the manual before you use the commands:
http://linux.die.net/man/8/hdparm
Post Reply